• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Will Komatsu Pc300 bucket interchange with anything else?

Actioninc

Active Member
Joined
Dec 30, 2008
Messages
31
Location
Midwest
Anyone know what the bucket pin dimension on a kobelco LC235 is?

komatsu 300 is metric but standard is roughly 20" boss to boss, 13 5/8 boom width, with 3.5 inch pins.
 

sharpy

New Member
Joined
Apr 23, 2012
Messages
3
Location
Australia
According to my listings, the SK235SRLC has 80mm (3.15") pins, 430mm (16.93") pin centres & 327mm (12.87") width front/rear

Komatsu PC300 & 350 pickups differ depending on the series, but not by a huge amount.

Hope that helps :)
 

JDOFMEMI

Senior Member
Joined
Jan 3, 2007
Messages
3,074
Location
SoCal
Someone posted this a couple of years back in a similar thread. I forget who to give credit to, but it is useful at times like this.

It is not 100% complete, and I have found a couple of errors in it, but it is generally right, and will give you a good idea what you can use.

Thanks again to the original poster of this file

View attachment EXCAVATOR PinCarrierDimensions.pdf
 
Top