1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

When pulling a scraper with a ADT(arctic) chassis...

Discussion in 'Scrapers' started by Questionable wizard, May 24, 2020.

  1. Questionable wizard

    Questionable wizard Well-Known Member

    Feb 10, 2018
    Does the chassis manufacturers still warranty drive line failures(Cat, Volvo, Terex, etc.)
    Those chassis weren't designed to pull scrapers. Does K Tech specify a minimum speed or gear to minimize drive line damage like John Deere does for pulling scrapers?