1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

What capacity axle is this axle spindle?

Discussion in 'Trailers' started by lake side bob, Dec 30, 2018.

  1. lake side bob

    lake side bob Well-Known Member

    Joined:
    Oct 3, 2009
    Messages:
    186
    Occupation:
    owner operator
    Location:
    minnesota
    I have this axle in inventory its an old one. Maybe from the late 1960's. I know I have had it in inventory for 25 years stored.
    its a 3 inch tube with spindle on each end.
    on the spindle the outer bearing diameter is 1.75 inches
    on the spindle the inter bearing diameter is 2 inches
    the spindle is welded to the 3 inch tube.
    The hub is 8 hole with 6.5 spacing 1/2 inch 20 thread bolts
    Any one have a source of information that would communicate the capacity of this axle.