1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

What Attachments Do You Use?

Discussion in 'Compact Equipment Attachments' started by Steve Frazier, Dec 12, 2003.

  1. catman13

    catman13 Senior Member

    Aug 22, 2011
    refrigeration engineer/excavation contractor
    oregon usa
    cat 289c
    smooth bucket
    orchard brush rake
    h/d grapple [ best buy ]
    72 in mower
  2. cherokee101

    cherokee101 Well-Known Member

    Oct 19, 2007
    Just saw your reply. Thank you for that. I don't find a Stanley repair center within 500 miles.
  3. Island-digger

    Island-digger Member

    Oct 5, 2021
    I have a John Deere 35G (which I love). I have the following:
    Three buckets (36" smooth lip, 24" trenching bucket and 12" trench bucket)
    Work Pro PA30B hydraulic drill motor
    Work Pro HH40C Hydraulic breaker. This thing is a work horse and a life saver in my neck of the woods where the ground is very rocky.

    Wish list:
    Hydraulic limb saw
    Skeleton bucket/rake
  4. gwhammy

    gwhammy Senior Member

    Nov 20, 2013
    On the 97 kubota I have the standard tooth bucket, forks, Hyd. hammer, auger, yard rake, tiller, homemade root rake out of a 10 ft. chisel plow, terminator brush hog, trencher, tree shear, 12 ft homemade snow blade. Also a homemade concrete bucket my brother made back in the 80's before there was such a thing.I think that's it.

    The 18,000 lb. excavator has a 1ft. 2ft. 3ft. and 5 foot ditching bucket along with a hyd thumb and WB hyd quick attach. The Hyd. hammer is an Atlas Copco which has a flat mounting area and I built a plate to use it on the excavator which is where it stays 99 percent of the time. Also a root tooth I made as well as a homemade quick attach bobtach to use the skid steer attachments on the excavator. The exc. would be a lot less useful without the WB hydraulic quick attach.