Reuben
Senior Member
My Body Jim Manno from Manno construction did this job at mount morris dam. $4500 per hour at two yards per trip. each round took about 2 minutes.http://www.youtube.com/watch?v=h6lwpaalKWo
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
we need a helicopter section
- Thread starter Reuben
- Start date
stumpjumper83
Senior Member
Reuben, how many hours did they have the chopper on the job for?
basspro
Well-Known Member
Sikorski...at 1st I thought a sky crane....than seeing the side I thought super puma, but either should have a FAR greater payload, esp. at sea level.
S-61? is my final guess. Wich still should be able to haul more that 2 cubic yards.
S-61? is my final guess. Wich still should be able to haul more that 2 cubic yards.
Reuben
Senior Member
It is a Sikorski......
Here is an artical that was in Modern Contractor about the Job....
http://www.moderncontractorsolutions.com/articlesdetail.php?id_articles=455&id_artcatg=2
basspro
Well-Known Member
haHA! it is a S-61! Years ago I was Helitack for the USFS, & got into birds a little, glad to see I can still spot the ugly ones!
WColtharp
Well-Known Member
That job must be stressful! I always enjoy seeing a helicopter thrown into the mix.