1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Waratah feed roller issues

Discussion in 'Forestry Equipment' started by Wes Broad, Jan 5, 2019.

  1. Wes Broad

    Wes Broad New Member

    Joined:
    Jan 5, 2019
    Messages:
    2
    Location:
    Slave lake, AB
    im having feed roller issues! They work fine until my machine warms up then they quit! Any ideas??
     
  2. John C.

    John C. Senior Member

    Joined:
    Jun 12, 2007
    Messages:
    7,629
    Occupation:
    Machinery & Equipment Appraiser
    Location:
    Northwest
    Circuit relief problem or worn out motors. Have you checked the return filters for debris?
     
  3. Wes Broad

    Wes Broad New Member

    Joined:
    Jan 5, 2019
    Messages:
    2
    Location:
    Slave lake, AB
    The motors are still good we’ve found some rubber in the spool. And the relief circuits are in need of changing. But we don’t get them time tomorrow!! I still wanna work the rest of my shift, and night shift. Any ideas as to how I can make that happen to get us by till tomorrow?