1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Volvo EC160B Error Code

Discussion in 'Excavators' started by rshackleford, Aug 31, 2020.

  1. rshackleford

    rshackleford Senior Member

    Joined:
    Jan 19, 2009
    Messages:
    400
    Location:
    North Dakota
    I've got an error code

    187 PPID 1190 4

    Operator says: "ex is broke down wont move nothing works i shut it off and tried to restart it and i have no power at all no lights no anything "

    upload_2020-8-31_17-17-4.png

    Now what?
     
  2. Ben Witter

    Ben Witter Senior Member

    Joined:
    Apr 3, 2013
    Messages:
    252
    Location:
    On the outside
    That code is for power shift solenoid, usually open circuit but could be shorted to ground. This will not cause a no power or no start condition. It will cause the engine to bog down.
    Have you tried switching it to manual mode and see if it will start and operate?
     
    Paul Council likes this.