We replaced the dump cable on our truck. Somehow we bumped the circuit board and blew the 25amp fuse that feeds the fuse\relay panel. Replaced the fuse now the truck won’t go in gear. I can’t see any other fuses blown. Any help would be greatly appreciate.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Volvo a25c won’t move
- Thread starter 9550
- Start date
funwithfuel
Senior Member
On the RF bulkhead there should be strip fuses in a black plastic housing, below the surge tank if I remember correctly. See if any are failed. Do you have power at the PCB fuses?
SlatcoAu
Well-Known Member
If you have a meter, check all the fuses in the main fuse block in the cab on rh side under the shift lever.