1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Understanding Sensor Based Ore Processing

Discussion in 'Computer Applications and 3D Modeling' started by Rory Bamford, Jun 16, 2018.

  1. Rory Bamford

    Rory Bamford Member

    May 31, 2018
    Here is episode 7 of the Crownsmen Podcast that I produce. This was filmed at the CIM convention in Vancouver, British Columbia and covers a much more technical side of ore processing.

    We had the pleasure of interviewing Brent Hilscher - Principal Engineer at Sacre-Davey Engineering and Tom Palangio - President of WipWare Inc.

    Would be great to hear any feedback you have on the show and recommendations on future guests.