1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Trimble earth works

Discussion in 'GPS Systems' started by Sk1970, Jul 26, 2021.

  1. Sk1970

    Sk1970 Member

    Dec 20, 2019
    Is there any good video on the set up of base station and using the rover. Can’t seem to find much on set up. Thanks
  2. Gradechecker

    Gradechecker Member

    Apr 18, 2021
    Had problems too mainly a gcs900/scs900 operator one thing I noticed is you have to upload your calibration files to your machine manually it’s not in the svd or svl files for designs