1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!


Discussion in 'Compact Track/Multi Terrain Loaders' started by Bluewave, Sep 24, 2021.

  1. Bluewave

    Bluewave Member

    Nov 9, 2016
    Pipeline Inspector
    Middle TN
    I have a Digga trencher with the combo chain on a XHF 1500 series. Im about to trench 6000 feet in middle TN and wanted to swap to a chain with bullet teeth. So first question, has anyone ran the straight digtac chain with good results in rocky/shale/calechee type material? Or anyone with bullet teeth chains can give feed back? Running on a 333G or KX80-4

    Premier attachment has this 50/50 chain.
    ive seen a picture of this bradco one.
    what I am really wanting is something like this, im not sure its possible but sure would be awesome in shale and rock