1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Topcon Base to Trimble machine

Discussion in 'Integrated Machine Control' started by Motor Grader, May 19, 2020.

  1. Motor Grader

    Motor Grader Well-Known Member

    Joined:
    Apr 13, 2007
    Messages:
    223
    Occupation:
    Technology Solutions Expert
    Location:
    Charlotte, NC
    Looking to run a CAT D6 with integrated Trimble off of a Topcon Hyper VR Base. I believe the Trimble to be 900MHz. The Topcon base has not been purchased yet. What is my best way to do this? I know my local CAT GPS guru has some sort of external radio but he isn't telling me what it is.