1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

The new Roadtec RX600E

Discussion in 'Mills' started by hardhatman, Mar 23, 2012.

  1. hardhatman

    hardhatman Active Member

    Feb 12, 2010
    Skowhegan Maine
  2. milling_drum

    milling_drum Senior Member

    Aug 19, 2008
    asphalt mill operator (ret)
    out west lately
    I'd like to see how the newer controls are for up top, I didn't like the setup they had. Looks like the boom is alot smaller too then they have traditionally used, im being told that roadtec get the load off the ground 100% better than the older models.