1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

TD8E part number help

Discussion in 'Dozers' started by Slandry786, May 8, 2015.

  1. Slandry786

    Slandry786 New Member

    May 8, 2015
    Dayton tx
    Hi guys im hoping someone can give me a hand. I have a td8e with the 239 and long trans and im trying to find the part number for the valve cover gasket. Ya ya I know I need to order books!!
  2. eastroad

    eastroad Member

    Jun 4, 2008
    SW Vermont
    P/N 3138642R3 should get you an engine valve cover gasket. Many, but not all, parts on that DT239 engine are the same as on the Ag side of I-H. The parts that differ are mostly related to the fact that they did not use a turbocharged version of that engine in Ag applications. An Ag dealer is close by me.
    I use an International 884 utility tractor when I look up parts for the engine. A few things I have to order from a Dresser dealer, and some of them are NLA.
    Case IH parts online lookup is here:
  3. Durt

    Durt Active Member

    Jan 25, 2012
    IH Mechanic
    British Columbia
    I might be able to help with your TD8 stuff.. If you want to email me with any questions .. I have been doing the Dresser IH dozer stuff for 30 years.. kurt@cpecanada.com