Rocky Chapman
New Member
Has anyone experienced no drive or lift/tilt on a TL26 but the pedal hydraulics work? Fluid is full filter is replaced just nothing at the controls. Any suggestions as to where to start looking would be appreciated.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Takeuchi TL26 no drive or lift
- Thread starter Rocky Chapman
- Start date
-
- Tags
- takeuchi tl26
heymccall
Senior Member
Does pedal work with seat bar up?
If yes, the pilot lockout solenoid is the first place I'd test for voltage, and it's coil for continuity.
If yes, the pilot lockout solenoid is the first place I'd test for voltage, and it's coil for continuity.
Rocky Chapman
New Member
Yes the previous owner had said that they disconnected the seat bar. I’ll check on how or why they did that.
Thanks for the reply