1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Stop alarm signal in a 310j john deere

Discussion in 'Tractor/Loader/Backhoes' started by ITAMECH61, Mar 13, 2016.

  1. ITAMECH61

    ITAMECH61 Member

    Joined:
    Jan 31, 2016
    Messages:
    24
    Location:
    venezuela
    HI i have a 310j backhoe loader when y tur the shift in forward or in reverse in the display panel apear the signol STOP flashing and the mensage is turn the shift to neutal position , ther are not codes actives and other flashing lights,the machine works all right and do the 4 shift fine anyone knows that this signal mean
     
  2. lantraxco

    lantraxco Senior Member

    Joined:
    Jan 1, 2009
    Messages:
    7,704
    Location:
    Elsewhen
    As a guess, a parking brake issue?
     
    BigWrench55 likes this.
  3. ITAMECH61

    ITAMECH61 Member

    Joined:
    Jan 31, 2016
    Messages:
    24
    Location:
    venezuela
    Thanks lantraxco the parking brake is released and the transmision works well
     
  4. chine61

    chine61 Member

    Joined:
    Dec 15, 2011
    Messages:
    15
    Location:
    mexico
    Hi ssme thing just haopen to me. I had a leak on the torque converter, we removed it, repaired it place it again and now the stop alarm buzzes when in fwd or rev. Machine was perfect before the leak repair. What was the issue on your hoe?

    Thanks
     
  5. mg2361

    mg2361 Senior Member

    Joined:
    Jul 5, 2016
    Messages:
    3,814
    Occupation:
    Equipment Mechanic/Technician
    Location:
    Pennsylvania
    The OP has not been on here since 2016. Not likely you are going to get an answer from him. If your park brake releases the first thing I would check is the park brake pressure switch which is mounted on the top front of the differential. Also post a serial number please.
     
    BigWrench55 likes this.