• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

S175 skid steer throttle lever

BryanM

Member
Joined
Jun 19, 2015
Messages
18
Location
ohio
quick question, lately I have noticed that when I have my bobcat at full throttle the throttle lever works itself to back down, not holding the same lever setting. Does anyone have a fix for this or have you come across it before. I think I have seen something about wave washers being bad. But don't remember.
 

CRAFT

Senior Member
Joined
Jan 6, 2010
Messages
929
Location
100 M H,BC,Canada
Occupation
30 yrs Owner/Operator
Check to see if the friction Nut is loose …. snug it up more for more Hold ...
 

crewchief888

Senior Member
Joined
Feb 1, 2012
Messages
1,781
Location
NWI
you can try tightening the 2 tension screws (3/16 allen)
if that doesnt help, replace the fiber washer and the 3 spring washers.


:drinkup
 
Top