1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

RX900 Drive belt numbers

Discussion in 'Mills' started by bean, Sep 10, 2011.

  1. bean

    bean Well-Known Member

    Joined:
    Dec 21, 2008
    Messages:
    124
    Location:
    Canada
    Anyone have the drive belt numbers for a RX900? Ours don't seem to have any, if not I will have to do the measuring guess :pointhead
     
  2. milling_drum

    milling_drum Senior Member

    Joined:
    Aug 19, 2008
    Messages:
    724
    Occupation:
    asphalt mill operator (ret)
    Location:
    out west lately
    um....call roadtec with the serial number of the machine and they will know exact specs? it isnt in the parts book? hmm
     
  3. bean

    bean Well-Known Member

    Joined:
    Dec 21, 2008
    Messages:
    124
    Location:
    Canada
    Obviously I know how to buy the roadtec genuine parts. With a few measurements and a phone call or 2 i got them crossed anyway.
     
  4. milling_drum

    milling_drum Senior Member

    Joined:
    Aug 19, 2008
    Messages:
    724
    Occupation:
    asphalt mill operator (ret)
    Location:
    out west lately
    This comes off a belt sitting in a shop full of CMI machines but bares a Roadtec tag and S/N

    210022-05

    I think 05 is the manufactuer date.
     
  5. milling_drum

    milling_drum Senior Member

    Joined:
    Aug 19, 2008
    Messages:
    724
    Occupation:
    asphalt mill operator (ret)
    Location:
    out west lately