DDoug
Formerly digger doug
Well not exactly, i have that exact machine.
Cutting 1/2" plate is the limit, and slow at that.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Running Plasma Cutter on Miller Trailblazer
- Thread starter dieseldog5.9
- Start date
Cutting 1/2" plate is the limit, and slow at that.
dieseldog5.9
Senior Member
What is it worth if I sell it on Craigslist?
Priced a new Hypotherm yesterday, think it was a 35 or a 45, $2000 price range.
Priced a new Hypotherm yesterday, think it was a 35 or a 45, $2000 price range.
DDoug
Formerly digger doug
I paid $150...but had to put a new torch on it ($80 from Ebay)
I see them trying to get $500-$800 on craigslist.
ThatGuysFarm
Active Member
I have an old Hobart 10,000 watt welder/generator that has about 3000 hrs on it and has had a pretty hard life. I use that to run a Hobart 45 amp plasma. I built an adaptor for the plug in. You just need to 2 hot wires and the ground wired in, don't worry about the 4th wire.