1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

RR250

Discussion in 'Mills' started by JDiacon, Feb 19, 2019.

  1. JDiacon

    JDiacon New Member

    Joined:
    Mar 27, 2018
    Messages:
    1
    Location:
    Inola, Oklahoma
    Need info on rotor drive differential particularly original pinion/ring gear ratio. Anybody out there know ANYTHING about this machine????
     
  2. muncherman

    muncherman New Member

    Joined:
    Feb 20, 2015
    Messages:
    4
    Location:
    emerald queensland australia
    from memory im pretty sure it is a 2 speed electric shift eaton no 5 diff ratio should be stamped on pinion end