1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

reset jrb controller

Discussion in 'Construction Equipment Attachments' started by dave blunt, Jun 25, 2020.

  1. dave blunt

    dave blunt New Member

    Jun 25, 2020
    I have AJR be quick disconnect on my excavator working around some trees sometimes the wires get disconnected and then the controller locks out I checked all the wires seem to be fine but I can't remember how to reset the controller.
  2. Md00738

    Md00738 Member

    Oct 15, 2016
    turn key on and hold both buttons down for like 5 seconds. Then turn key off, then back on and should be good to go.