-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Repair manual for SH55U-2 Sumitomo Excavator
- Thread starter denfu
- Start date
uffex
Senior Member
Good day
If you can be specific regarding the problem we may be able to help.
Kind regards
Uffex
If you can be specific regarding the problem we may be able to help.
Kind regards
Uffex
Thank you for your reply.
Trying to repair an older machine that received very little maintenance from the previous owners.
Currently rebuilding the Isuzu 4LE1 engine which I understand, but one of the Final Drives may need rebuilding, wires harness are cut off and would like to have a better understanding of the Hydraulic system to trouble shoot now and the future.
That is the main reason I was looking for a repair manual.
I appreciate any help or guidance you can provide.
Trying to repair an older machine that received very little maintenance from the previous owners.
Currently rebuilding the Isuzu 4LE1 engine which I understand, but one of the Final Drives may need rebuilding, wires harness are cut off and would like to have a better understanding of the Hydraulic system to trouble shoot now and the future.
That is the main reason I was looking for a repair manual.
I appreciate any help or guidance you can provide.
uffex
Senior Member
Good day
I cannot help with a manual but if we can identfy the final drive we have a chance to get the repair information, wiring and hydraulic schematic you could try appearing for those instead of the manual.
Kind regards
Uffex
I cannot help with a manual but if we can identfy the final drive we have a chance to get the repair information, wiring and hydraulic schematic you could try appearing for those instead of the manual.
Kind regards
Uffex
It looks like that is the best strategy and thank you again for your help and support.
It will take be a few days to get the engine rebuilt and back in the machine. I will then start looking at the Hydraulics & Electrical issues and let you know what I find.
Have a good day.
Dennis
It will take be a few days to get the engine rebuilt and back in the machine. I will then start looking at the Hydraulics & Electrical issues and let you know what I find.
Have a good day.
Dennis