• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

pwergrid 800 won't turn over

recycle

New Member
Joined
Oct 24, 2014
Messages
1
Location
Sylvania,Oh
We have a powerscreen Powergrid 800. Trying to start machine with no luck. Light for oil and light for battery comes on when attempting to start. Checked oil and was over filled. Changed oil, now is at exact full level. Installed new battery. Light still come on showing a problem. The fault light was correct on the oil but now is fixed. How do you check or override the lights (sensors)
 

global2957

Active Member
Joined
Nov 26, 2014
Messages
43
Location
New York
as an electrician I would trace the wire from the fault light. the entire circuit has to be continuous in order to start, you can jump the starter from the control switch bypassing all the safety switches,but a word of caution make sure that whatever is preventing the machine from starting is not going to create a life threatening hazard. check, check ,check again but please use your brain and be safe
 
Top