1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Pucket Brothers t650 adding hydraulic

Discussion in 'Pavers' started by monster76, Jun 11, 2020.

  1. monster76

    monster76 Senior Member

    Joined:
    Aug 15, 2013
    Messages:
    525
    Occupation:
    Contractor
    Location:
    Miami Fl
    I bought a pucket brothers paver runs great tbh had 90 percent of the hoses replaced I have never ran a paver before in my life always subbed it out but ive done a few jobs with it with great success, how ever the hydraulic pump sheared the shaft, I had the pump rebuilt but now im curious how do I add hydraulic oil to the machine? it has a small reservoir with a cap on it and a warning label not to remove it. ill post some pictures of it later if that helps