1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Parts manual for D6C

Discussion in 'Dozers' started by Hardtimer, Jan 16, 2020.

  1. Hardtimer

    Hardtimer New Member

    Joined:
    Jan 16, 2020
    Messages:
    3
    Location:
    Oklahoma
    I am in need of parts manual for D6C s/n 74A&up
    Thanks
     
  2. Welder Dave

    Welder Dave Senior Member

    Joined:
    Oct 12, 2014
    Messages:
    4,169
    Location:
    Canada
    I think you'll need to list the complete serial number as there could be several changes within a model prefix.
     
  3. Old Magnet

    Old Magnet Senior Member

    Joined:
    May 11, 2010
    Messages:
    1,559
    Location:
    Corralitos, California
    Check ebay.....Only one manual if you get the 76A1-76A6061 version.
     
  4. Hardtimer

    Hardtimer New Member

    Joined:
    Jan 16, 2020
    Messages:
    3
    Location:
    Oklahoma
    S/n 74A00349
     
  5. FWD

    FWD Well-Known Member

    Joined:
    Jan 7, 2009
    Messages:
    146
    Location:
    Barron County, Wi
    74A is a direct drive and 76A is a power shift. They were made in the same time frame.
    FWD
     
  6. Old Magnet

    Old Magnet Senior Member

    Joined:
    May 11, 2010
    Messages:
    1,559
    Location:
    Corralitos, California
    Right you are. I missed that. You want the 74A1-74A3108 parts book which covers full production of that model.