1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Number 25 Cable control unit

Discussion in 'Dozers' started by LG 78, May 16, 2022.

  1. LG 78

    LG 78 Well-Known Member

    Joined:
    May 3, 2020
    Messages:
    58
    Location:
    King Country NZ
    Hi everyone
    I have had my newly purchase D6c and scoop working and going well but..
    The CCU has been tampered with and I am needing some parts or a second unit in NZ that I can purchase
    The parts that im needing are 4F2521 and 4F2348
    Any help as always is greatly appreciated
    4F2521 is the lever (will try to add photo
    4F2348 is the adjustment rod
    Could anyone tell me if these parts are the same on a number 29 ccu
    Cheers
     

    Attached Files:

    Last edited: May 16, 2022
  2. Old Magnet

    Old Magnet Senior Member

    Joined:
    May 11, 2010
    Messages:
    1,840
    Location:
    Corralitos, California
    4F2521 RH lever is the same
    Rod is a 4H4734 on the #29

    Check www.machinerytrader.com
    Parts are available, even in Australia
     
    Last edited: May 16, 2022
  3. LG 78

    LG 78 Well-Known Member

    Joined:
    May 3, 2020
    Messages:
    58
    Location:
    King Country NZ
    Once again your a legend thanks Old Magnet
    Think I have found 3 #29 units free to a good home not far from me so will check them out tomorrow
     
  4. Old Magnet

    Old Magnet Senior Member

    Joined:
    May 11, 2010
    Messages:
    1,840
    Location:
    Corralitos, California
    Nothing special about that rod that it couldn't be fabricated, Just longer on the #29.
     
  5. LG 78

    LG 78 Well-Known Member

    Joined:
    May 3, 2020
    Messages:
    58
    Location:
    King Country NZ
    Found 3 #25 CCUs got the first 2 home get the 3rd another day big units to handle when they're not bolted to a tractor
     

    Attached Files:

    56wrench, nicky 68a and sled dog like this.
  6. epirbalex

    epirbalex Senior Member

    Joined:
    Aug 5, 2017
    Messages:
    373
    Occupation:
    peasant
    Location:
    Akitio
    https://www.trademe.co.nz/a/marketp...oving-machinery/bulldozers/listing/3604239417

    Listed today
     
    LG 78 likes this.
  7. LG 78

    LG 78 Well-Known Member

    Joined:
    May 3, 2020
    Messages:
    58
    Location:
    King Country NZ
    Thanks for that it's awesome to know people are around to keep an eye open and to help others
    It's one of the units that I picked up the other day I've been told that I don't need 3 spare units so hopefully I can help someone else out by selling one
     
  8. nicky 68a

    nicky 68a Senior Member

    Joined:
    Apr 14, 2013
    Messages:
    914
    Location:
    england
    Hi LG 78.
    Before you sell one,make sure they are absolutely 100% identical in EVERY way before selling one.In my experience of ccu’s on D8’s there are often many different configurations.They can deceive you at every turn.
    You may require only one part from each of your ccu’s,but I assure you that that one part you haven’t got will have you banging your head against the wall.
    Keep ALL 3.
    Best regards
    Nicky
     
    LG 78 likes this.
  9. Old Magnet

    Old Magnet Senior Member

    Joined:
    May 11, 2010
    Messages:
    1,840
    Location:
    Corralitos, California
    Best bet is to check/match actual s/n's for exact match.