1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Nordberg C63 Jaw Liner Stuck

Discussion in 'Crushers' started by RJMoses, Jul 23, 2021.

  1. RJMoses

    RJMoses New Member

    Joined:
    Jul 23, 2021
    Messages:
    2
    Location:
    United State
    Greatings All.

    I have a new to me nordberg C63 jaw crusher. the jaw liners are due for a rotation. However, one is stuck and we cant get it loose. All of the retainers have been removed and as much of the debris wedged in around the liner as possible. We have tried everything we can think of to get the liner to come loose including beating on it, pulling on it, pushing from the backside with 20 ton bottle jacks, crushing logs and rock with the retainers removed, etc.

    Short of cutting the liner out (its got 50% life remaining), we are at a loss for what to do next.
    Does anyone have any suggestions?

    Many thanks in advance.
     
    DMiller likes this.
  2. crane operator

    crane operator Senior Member

    Joined:
    Mar 27, 2009
    Messages:
    5,517
    Location:
    sw missouri
    I don't know anything specifically about a nordberg jaw, but I've helped disassemble quite a few with my cranes. One really stuck one, they walked a excavator over with the rock hammer on it, and beat on it to knock it loose. But that was on a low trailer/stand mounted one, if your jaw is up in a tower or up on a high stand, that's not going to happen.
     
    HardRockNM, DMiller and funwithfuel like this.
  3. RJMoses

    RJMoses New Member

    Joined:
    Jul 23, 2021
    Messages:
    2
    Location:
    United State
    Thanks for the response. We do have a hydraulic demolition hammer and we can access the liner with it. we will definitely try this before cutting.