1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

New Holland L220 Will not lift enough weight

Discussion in 'Test Forum' started by Skidloadertech, Jan 18, 2017.

  1. Skidloadertech

    Skidloadertech Member

    Jan 2, 2016
    Service Manager
    I have a New Holland L220 Skid steer that will not lift like it should . We have tested main hydraulic pressure and flow which is good . We have also tested the boom section of the valve, testing for port relief problems . It builds proper pressure on the boom circuit . The boom does not leak down . Any ideas ?