• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

n-14 question

Mike L

Mike L

Senior Member
Joined
Dec 1, 2010
Messages
1,922
Location
Texas
Occupation
Self employed field mechanic
motor is leaking oil from where the head and exhaust manifold bolt together. has done it for a while and is getting worse. it leaks on 4-5 cylinders. I don't believe that the turbo could be passing oil and pushing it back towards the head. I was thinking valve seals but I don't know much about the n-14. any ideas?
 
O

ohiofleet

Well-Known Member
Joined
Nov 24, 2011
Messages
137
Location
dayton ohio
could be the heads or cyliders pushing oil n14 are a good engine and cheap to rebuild hell the last one I did the heads ran about 450 each from the dealer I know you already looked but is the turbo pushing oil into the cac
 
Last edited:
You must log in or register to reply here.
Top