musicmanjer
New Member
Hi, This is my first post, mostly in desparation.
I have a 1992 Mits BD2G dozer that had a bad left steering clutch. 20 yrs ago I replaced both clutches and it ran great until about 3 months ago. I'm guessing the clutch froze up this time. I removed all the flange bolts on both sides (had to use heat) and the clutch is free between both flanges. I can spin it, but cannot get it to come out, even with a come-along suspended from the top roll bar, and that bent when trying to winch it up and out.
Any suggestions? Dynamite?
I have a 1992 Mits BD2G dozer that had a bad left steering clutch. 20 yrs ago I replaced both clutches and it ran great until about 3 months ago. I'm guessing the clutch froze up this time. I removed all the flange bolts on both sides (had to use heat) and the clutch is free between both flanges. I can spin it, but cannot get it to come out, even with a come-along suspended from the top roll bar, and that bent when trying to winch it up and out.
Any suggestions? Dynamite?