• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Manitek Malfunction

C

clclawson80

New Member
Joined
Oct 2, 2023
Messages
2
Location
NM
So inside of my 2020 manitex 155 cab got a little wet not saturated because of a sudden storm and the door blowing open! Shut door and let storm pass! After storm turn power back on and attempted to make a lift! LMI went through normal cycles but could not move any controls. No codes found with override button held down you can operate. And the horn would sound every minutes or so with two beeps!
 
C

CraneMechanic73

Well-Known Member
Joined
May 29, 2022
Messages
73
Location
Georgia
assuming the computer is happy and no codes present. I’d check the onboard function kick out fuse 10 amp at computer board. Then start verifying the kick out circuit using the schematics.
 
You must log in or register to reply here.
Top