1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Load sense fault codes

Discussion in 'Other Construction/Demolition Equipment' started by Don Elliott, Sep 30, 2020.

  1. Don Elliott

    Don Elliott New Member

    Joined:
    Sep 30, 2020
    Messages:
    3
    Location:
    Seattle WA
    Hello everyone. I am Don from Equipment Share in Seattle. I have a Genie boom model Z-45XC and I have a load sense fault code 3413. Even Genie support hasn’t been able to help me. I hope there is someone here that can help out.
     
  2. excavator

    excavator Senior Member

    Joined:
    Oct 16, 2006
    Messages:
    1,036
    Location:
    Pacific North West
    Not sure I can help either but with Genie we are going to need a serial number.
     
  3. Don Elliott

    Don Elliott New Member

    Joined:
    Sep 30, 2020
    Messages:
    3
    Location:
    Seattle WA
    S/N is Z4525XCF-913
     
  4. Vetech63

    Vetech63 Senior Member

    Joined:
    Aug 10, 2016
    Messages:
    2,765
    Location:
    Oklahoma
    You may want to explain what is going on with the machine.
     
    mg2361 likes this.
  5. Don Elliott

    Don Elliott New Member

    Joined:
    Sep 30, 2020
    Messages:
    3
    Location:
    Seattle WA
    It won’t do anything. Just gives that fault warning, alarm going off and won’t even start
     
  6. MarshallPowerGen

    MarshallPowerGen Well-Known Member

    Joined:
    Nov 27, 2017
    Messages:
    204
    Occupation:
    Diesel & Generator Mechanic
    Location:
    Coeur d'Alene, Idaho