Latest find, IH 2400A

[stumpjumper83]

Here are soem pics of my latest find. Its an IH 2400A, basically its a 574 with a heavy cast front axle and a heavy duty industrial loader, much like a modern skip loader. This particular one has a blown c175 gas engine and it came with a c-200 block and a c-200 power unit. Those are the engines in the back of the pickup. I did some parts research and fount that the only differences are the piston diameters and maybe the carbs. So I'm going to put a c-200 in the loader. This should give me about a 20 hp jump from what the c-175 had. Enjoy the pics.

 

[OneWelder]

I have a earlier baby sibling- 3414 with a 144 gas engine
In the 44 yrs the family has owened it there have been virtually no repairs
If yours has the Hydro trans - pull filter off side of trans and check for metal-there may also be one on left side firewall

 

[stumpjumper83]

Nope I have the gear trans, them hydros can be expensive, especially when they stop working. If the tractor was a hydro, I probably would have let it sit. Hopefully I can get the old engine out and the new one in by spring... we will see...

 

[bigblueox]

i like the intake leading into the carb. radiator hose has so many useful applications!

 

[M.J.]

Very nice. We just acquired a 2500A Series.

 

[M.J.]

Some trouble finding low range though on the 2500 - any ideas?

 

[M.J.]

Does your's have the plate on the shifter - can you post a pic if so?

 

[td25c]

The IH 2400a looks good Stumpjumper.Get the new engine in it and add a box blade on the rear and your in business.Now your going to have to tell us about the belerus with the back hoe on it.We have a few Belerus tractors in my area but never did see one with a backhoe on it.