Hardline
Senior Member
I have one that has stumped me. I have a 482C that when you turn on the park brake it allows the spring to appy pressure and set the park brake. This spring is pushing the fluid back into the dipstick of the reverser and the oil will blow the dipstick out. The vent on the dipstick of the reverser is going to a fitting on top of the reverser housing. The vent is clear. Any ideas as to why this would start doing this? The operator says he unbolted the park brake canistor to replace because the rod seal was leaking. But a replacement was not available and the machine started doing this after reassembly. Thanks JJ