1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

John Deere 210 G

Discussion in 'Excavators' started by GODSDOZER, May 24, 2020 at 4:39 AM.

  1. GODSDOZER

    GODSDOZER Well-Known Member

    Joined:
    Jan 7, 2011
    Messages:
    84
    Occupation:
    Dirt Contractor
    Location:
    East Texas
    Can someone tell me where the latch is located to roll up the front windshield ?

    Thanks
     
  2. mg2361

    mg2361 Senior Member

    Joined:
    Jul 5, 2016
    Messages:
    1,546
    Occupation:
    Equipment Mechanic/Technician
    Location:
    Pennsylvania
    There is a bar (about an 1"+ in diameter) that runs across the top of the front window. That bar is the latch. Grab bar and pull to release the latch for the window.
     
  3. GODSDOZER

    GODSDOZER Well-Known Member

    Joined:
    Jan 7, 2011
    Messages:
    84
    Occupation:
    Dirt Contractor
    Location:
    East Texas
    Thanks for the quick replay, its a friends machine and his AC went out, was just trying make it so I can breath while doing a little project. I know what bar you are talking about . I have pulled on that bar but it seems stuck. Hummm ! is there a locking mechanism on that bar somewhere ?
     
  4. GODSDOZER

    GODSDOZER Well-Known Member

    Joined:
    Jan 7, 2011
    Messages:
    84
    Occupation:
    Dirt Contractor
    Location:
    East Texas
    Do I pull down, up or straight towards the seat ?
     
  5. mg2361

    mg2361 Senior Member

    Joined:
    Jul 5, 2016
    Messages:
    1,546
    Occupation:
    Equipment Mechanic/Technician
    Location:
    Pennsylvania
    No there is not.

    Towards the seat.
     
  6. GODSDOZER

    GODSDOZER Well-Known Member

    Joined:
    Jan 7, 2011
    Messages:
    84
    Occupation:
    Dirt Contractor
    Location:
    East Texas