• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

JLG E-400A no boom controls

TylerB992

Member
Joined
Oct 23, 2020
Messages
5
Location
Canada
Hello everyone! Looking to get some advice for troubleshooting an e-400a boom lift. When the key is set to ground control everything works perfectly fine. When you turn to the boom controls, nothing works on the boom. There is voltage in the boom control box. I’ve tested the cable for continuity and it’s good. Foot pedal is good. Speed control goes from 0-5000ohms which seems fine too.

inside the boom control the black box has a red light that flashes 6 times.

any thoughts on what it could be? Does anyone know where I can find the circuit breakers or fuses? Any help is greatly appreciated!
 

Waterppk

New Member
Joined
Oct 22, 2020
Messages
2
Location
Wisconsin
Have you checked to make sure you have a good ground? Maybe you have power but a poor ground that's causing issues.
 
Top