1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

JLG 40H lost bang bang controls in platform

Discussion in 'Forklifts/Telehandlers' started by excavator, Jan 7, 2020.

  1. excavator

    excavator Senior Member

    Joined:
    Oct 16, 2006
    Messages:
    892
    Location:
    Pacific North West
    I'm working on a JLG 40H w an Lrg 425 engine that lost all bang bang controls ( basket rotate, telescope, level & steer) in the basket. They work fine from the ground control panel and all the proportional controls ( drive, swing & lift) work fine in the basket. Where do the select relays (R2 & R3) get power from when in platform mode? Thanks in advance for any thoughts or ideas.
     
  2. excavator

    excavator Senior Member

    Joined:
    Oct 16, 2006
    Messages:
    892
    Location:
    Pacific North West
    I got it figured out, found a broken wire in the boom harness. The problem I was having is the wire schematic I have is a very poor copy from JLG and the platform terminal strip is virtually unreadable. I went online and blew it up to read. Thanks.