1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

JLG 400S turntable swing bearing grease fittings?

Discussion in 'Forklifts/Telehandlers' started by TommyJLG, Jan 29, 2020.

  1. TommyJLG

    TommyJLG Member

    Joined:
    Jan 27, 2020
    Messages:
    16
    Location:
    Spicewood, Tx
    Hello, the service manual states there are 2 grease fittings on the turntable swing bearing. Anyone know best way to access? Seems like JLG likes to keep their methods close to the vest. Thank you!
     
  2. 92U 3406

    92U 3406 Senior Member

    Joined:
    Jan 3, 2017
    Messages:
    1,482
    Occupation:
    Professional Wrench Spinner
    Location:
    Canuckistan
    Haven't touched a JLG lift in a few years but from what I remember, they are remote grease fittings. Just search around under the hoods they shouldn't be too hard to locate.
     
  3. TommyJLG

    TommyJLG Member

    Joined:
    Jan 27, 2020
    Messages:
    16
    Location:
    Spicewood, Tx
    Could not find them. Are they zirts on the end of a hose? Thank you.
     
  4. 92U 3406

    92U 3406 Senior Member

    Joined:
    Jan 3, 2017
    Messages:
    1,482
    Occupation:
    Professional Wrench Spinner
    Location:
    Canuckistan
    Usually a small block welded to the frame.