• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

JCB 214S

Dave Neubert

Dave Neubert

Senior Member
Joined
Jul 18, 2018
Messages
1,660
Location
Monroe NC
Any one know how to trouble shoot the 4 wheel steer I pulled the proximity switch's and have no continuity they have 3 wires one hot one ground and the other is switched when does the switch close and does it have to be powered to test
 
S

skata

Senior Member
Joined
May 10, 2007
Messages
1,541
Location
midwest
You can find videos on YouTube to test these.


And if you find the sensor to be bad, you can bypass it if you want. Or replace with a generic one. Just need to determine the type and if it's normally open or normally closed.
 
You must log in or register to reply here.
Top