1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Integrated Machine Control vs Traditional Mast-Mounted

Discussion in 'Integrated Machine Control' started by wsnewellgps, Apr 3, 2017.

  1. wsnewellgps

    wsnewellgps New Member

    Joined:
    Apr 3, 2017
    Messages:
    2
    Location:
    Montgomery
    I would like to know if anyone has any knowledge or has had any past experiences with the new integrated machine control, primarily information on the durability of these "stroke sensing hydraulic cylinders". All of our equipment with machine control is currently outfitted with the traditional add-on systems. I know this technology is fairly new to the market compared to the traditionally aftermarket installed mast-mounted systems, but does anyone know anything about the accuracy of these sensors in the hydraulic cylinder, say 5-10 years down the road after using them daily? Are these hydraulic cylinders something that will need to be replaced and recalibrated regularly? Seems to me they would lose accuracy after a while and have to be replaced or repositioned. Thanks!