1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Hough H65C

Discussion in 'Wheel Loaders' started by Snuffy2, May 18, 2020.

  1. Snuffy2

    Snuffy2 Member

    Joined:
    Jan 31, 2014
    Messages:
    20
    Location:
    Mendon /mich.
    Good morning , I am looking for Bucket cylinder seal kit for a Payloader H65C loader . I didn't want to pull the cylinder until I have located the parts . I once located a part supplier near Grand Rapids Mi. But now I can't seem to locate them again. Any help would be appreciated. Thank you....Jim
     
  2. kshansen

    kshansen Senior Member

    Joined:
    Mar 11, 2012
    Messages:
    8,283
    Occupation:
    Retired Mechanic in Stone Quarry
    Location:
    Central New York, USA
    Just a wild shot in the dark, is there a Komatsu dealer near you seems there was some connection between Hough/Dresser and Komatsu at one time.
     
  3. JTWAT

    JTWAT Well-Known Member

    Joined:
    Mar 14, 2012
    Messages:
    135
    Location:
    Central FLA
    I have same machine. Found seal kits at www.herculesus.com
    I rebuilt all the cylinders on mine except the one you need to repair. I looked at their website and don't see the kits anymore so you may need to call them.
     
    Last edited: May 24, 2020
  4. .RC.

    .RC. Well-Known Member

    Joined:
    Nov 27, 2012
    Messages:
    199
    Location:
    Qld, Australia