1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Grease Zerks Kit

Discussion in 'Lubrication' started by clansing1, May 8, 2011.

  1. clansing1

    clansing1 Well-Known Member

    Joined:
    Oct 31, 2008
    Messages:
    146
    Location:
    Iowa
    I am looking for a source for a very good quality grease zerk kit that would have both standard and metric fittings. Any ideas? Thanks in advance.
     
  2. surfer-joe

    surfer-joe Senior Member

    Joined:
    Mar 25, 2007
    Messages:
    1,403
    Location:
    Arizona
    NAPA has them, as do many farm equipment dealers. Grainger also has them and I believe Northern Hydraulics does too. Just about any good Co-op outlet would have them.
     
  3. adam21584

    adam21584 Well-Known Member

    Joined:
    Aug 4, 2009
    Messages:
    54
    Location:
    minnesota
    the napa yellow package is a good set don't buy cheap ones. They never seem to work right.