Grease Selection

[Coaldust]

Rockfarm,

The Timkin OK Load Test is antiquated and isn’t very useful today. The short answer.

 

[Nige]

Rockfarm,

The Timkin OK Load Test is antiquated and isn’t very useful today. The short answer.

The first things I look at are the 4-ball results for both weld load & scar size. IMO that's the reason those two parameters are #1 & #2 on the "seven tests to look for". YMMV.

 

[JTWAT]

For me, it's a Calcium Complex for high speed bearings and a 5% moly for low speed, high load applications. Both are synthetic.

 

[JLarson]

I run on a pretty hard 'if it can't run in mystik JT-6 that's a design problem' philosophy. We feed that to anything we can.

We use it on all the motors we get in for bearings too because an extensive field study has shown you're average operations monkey with a gun isn't gonna put Mobile Polyrex EM in it anyway lol, give them their motor back and tell them to use the grease that looks like strawberry jam.

 

[GEORGIOS198217]

It is a common question for someone to ask what the correct grease is for a particular application.
Of course there's no such thing as "one size fits all" when it comes to grease.
Hands up, how many people can say that they can look at a manufacturer's data sheet and compare one product to another on the basis of the specification as it's writ on the paper..?

Here's a crib sheet "seven tests for selecting the right grease" that tries to take a lot of the mystery out of the process.

Mr nige why I can’t open this?

 

[kshansen]

Mr nige why I can’t open this?

Not sure why it's not opening for you. When I clicked on that link it does ask me to save it as PDF I saved it to my "desktop" and then I can open it from there.

 

[GEORGIOS198217]

I open it but is very difficult for me to understand all this. Can someone help me to buy the exactly correct grease for my machine? I have a cat grader h series. I don’t mind to use two type of grease or everything is needed