1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

GENIE Z60/34 2011 - slow drive problem

Discussion in 'Other Construction/Demolition Equipment' started by TomGie, Nov 25, 2021.

  1. TomGie

    TomGie New Member

    Nov 25, 2021

    I have problem with Genie Z60/34, SN: Z6011-10469.

    When it's elevated it drive in high speed (really fast) like in stowed position.
    I have checked slow/high speed valve (near to engine) - there is no power on it in any boom position (stowed or elevated) - I have read in another thread - there will be power only in high speed mode. So maybe somebody know reason why it drive's fast, when valve it's in slow position (valve checked - works good). Maybe someone changed speed on slow mode, because fast mode is broken? Can I change/calibrate speed on slow mode?

    Thanks in advance!