1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Genie s45 intermittant glitch

Discussion in 'Forklifts/Telehandlers' started by Travis Koehn, Dec 7, 2017.

  1. Travis Koehn

    Travis Koehn New Member

    Joined:
    Dec 7, 2017
    Messages:
    1
    Location:
    Central Kansas
    Hi We are working on a 2007 Genie s-45 s/n 507-13857. The problem it has is all functions stop working at random. It might work for an hour or a minute, then drive, steer, and all boom functions stop working. The engine will stay running. Shut it off and restart it and it will work again til next time. Any ideas where to start looking? Thanks
     
  2. timstar2

    timstar2 Member

    Joined:
    Jan 9, 2018
    Messages:
    19
    Location:
    canada
    check the e stop contacts in platform and look for trouble lights on the alc 500 board
     
    Geoff Lott and Rentalmechanic like this.
  3. Rentalmechanic

    Rentalmechanic Well-Known Member

    Joined:
    Jul 30, 2015
    Messages:
    59
    Location:
    Memphis,tn
    On the card the lights flash count the lights most have the trouble code chart on the inside of the box In the platform
     
  4. Geoff Lott

    Geoff Lott Member

    Joined:
    Oct 20, 2018
    Messages:
    12
    Location:
    Mississippi
    Check both estop contact blocks at ground and platform for input and output voltage and fluctuations when issue occurs