1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Genie 1056

Discussion in 'Forklifts/Telehandlers' started by Greenmonzter, Mar 26, 2020.

  1. Greenmonzter

    Greenmonzter Member

    Joined:
    Jan 7, 2017
    Messages:
    11
    Occupation:
    carpenter/framing/ heavyequipment
    Location:
    kansas city missouri
    Gotta 1056 that has been stalling during operation a few weeks now I havent been to track down the cause..then today it twisted the yoke out of the rubber isolater inside the shaft.. Transmission issue? Or converter clutch locking up intermittent??
     
  2. Txhayseed

    Txhayseed Well-Known Member

    Joined:
    Dec 23, 2019
    Messages:
    69
    Location:
    Texas
    When you say locking up it like the hydraulics are dead heading and Stalling out the engine ? Did you have any driving issues before ? The hydraulic pump receives its power out of the output shaft of the transmission. If the machine was driving fine and was not jerking or trying to lurch with it in gear but not moving or had no problem untracking and getting going i would maybe lean more to the hydraulic pump first. Could be converter but i would think you would have felt some drive issues...