James alex zheltonoga
Well-Known Member
I got back to the clt80 today. according to the diagram at you sent to me the heavy green wire that goes into relay unit 3 ( RELAY 3 ) SHOULD HAVE 12V GOING TO IT ,and it does,but when i check the light blue/with black strip my test light barely comes on and i can hear relay 3 click. I also unhooked fuel shut off solenoid and powered up the red wire and traced it back to the relay,so that wire is not broken. I dont have any voltage in the white wire that goes to the red hold wire when the relay closes. The white wire goes off the page that you sent.