1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Fiat Allis M65

Discussion in 'Motor Graders' started by Wes Jackson, Jul 13, 2019.

  1. Wes Jackson

    Wes Jackson Well-Known Member

    Joined:
    Nov 11, 2018
    Messages:
    76
    Location:
    Florence SC
    I have an M65 diesel powered and have lost the plug out of the intake manifold, it is approx ! 1/4 in, does anyone have one laying around or have a part number for it,can't find it in my book
     
  2. d9gdon

    d9gdon Senior Member

    Joined:
    Feb 12, 2010
    Messages:
    1,385
    Location:
    central texas
  3. Wes Jackson

    Wes Jackson Well-Known Member

    Joined:
    Nov 11, 2018
    Messages:
    76
    Location:
    Florence SC
    This plug is a lot bigger than 1/8, it is between an 1 1/4 and 1 1/2, standard pipe plug will not work
     
  4. DIYDAVE

    DIYDAVE Senior Member

    Joined:
    Feb 18, 2007
    Messages:
    1,765
    Location:
    MD
  5. Wes Jackson

    Wes Jackson Well-Known Member

    Joined:
    Nov 11, 2018
    Messages:
    76
    Location:
    Florence SC
    Thanks, might be worth a try
     
  6. d9gdon

    d9gdon Senior Member

    Joined:
    Feb 12, 2010
    Messages:
    1,385
    Location:
    central texas
    I was thinking intake air tube where ether assist was plumbed.

    Parts book shows a 1/4" NPT hex head plug used in intake manifold and that's it.

    I see it on page 75 now. Its a 1 1/2" expansion plug. Not the intake manifold, its on the air intake housing. Part #70910014.
     
    Last edited: Jul 16, 2019
  7. Wes Jackson

    Wes Jackson Well-Known Member

    Joined:
    Nov 11, 2018
    Messages:
    76
    Location:
    Florence SC
    Thanks, got a rubber freeze plug that fit great