1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Ditch witch 950 r/t subsite locator

Discussion in 'General Industry Questions' started by 512high, Mar 25, 2015.

  1. 512high

    512high Well-Known Member

    Mar 4, 2014
    new hampshire
    Not sure if this is the right spot for this question. I own a small irrigation company, when we trace irrigation wire etc, we are using a tempo 521 locator, you hook up xmitr to wire or valve wire you want to locate and you have a handheld rvcr that emits tone only, no display, etc. I have a chance to pick up a used 950r/t locator that most utility companies or dig safe uses to mark cable, Telco, power etc. I have been told if I hook up their direct connect leads, it will work for irrigation as well or any wire etc. Anyone using and thoughts?? Ty

  2. backhoe1

    backhoe1 Well-Known Member

    Aug 24, 2007
    South Dakota
    I think you're on track.