1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

D330a Generator, fuel line gushing, need help!

Discussion in 'Generators/Gensets' started by Azitizz, Nov 16, 2021.

  1. grandpa

    grandpa Senior Member

    Joined:
    Oct 15, 2009
    Messages:
    1,929
    Location:
    northern minnesota
    Yes on the needle valve,,,, it may quit dripping after a little bit.
     
  2. kshansen

    kshansen Senior Member

    Joined:
    Mar 11, 2012
    Messages:
    10,169
    Occupation:
    Retired Mechanic in Stone Quarry
    Location:
    Central New York, USA
    Trying to remember if that valve the knob is on if it will come all the way out so you could try cleaning the tapered end that seals it in the casting or if you have to unscrew the hex nut part under that knob to get it off.

    Could just be a little bit of trash or rust on the end of the needle that is causing it to drip.
     
    Jonas302 and grandpa like this.